Updated 27 October 2026 · 7 min read

Secondary glazing in New Zealand: does it work, and what does it cost?

In BRANZ hot-box tests, magnetic acrylic secondary glazing lifted a single-glazed window from R0.15 to R0.36, and low-E framed panels to R0.57. Options, NZ prices and paybacks.

By the NZ Double Glazing team

Key takeaways

  • Secondary glazing is a second pane, acrylic or glass, fitted inside your existing window. The window itself is not changed.
  • Tested in the BRANZ Guarded Hot Box on a single-glazed aluminium window (R0.15), magnetic acrylic reached R0.36, shrink film R0.35, a clear aluminium-framed panel R0.34 and a low-E aluminium-framed panel R0.57 (BRANZ Build 116, 2010).
  • Modelled paybacks were 15–17 years in Dunedin, 17–20 in Christchurch, 20–22 in Wellington and about 40 in Auckland, at 2010 power prices. Colder places pay back fastest.
  • DIY magnetic kits are the cheapest permanent version: a 30m MagnetGlaze magnetic strip roll is $322 incl GST at Award Plastics (checked 27 Oct 2026). The acrylic is cut to size on top of that.
  • It suits heritage joinery, rentals and aluminium frames that shrink film won't stick to. Retrofit double glazing is the tidier long-term fix for windows you open every day.

Yes, secondary glazing works. In BRANZ hot-box tests a single-glazed aluminium window went from R0.15 to R0.36 with a magnetically attached acrylic panel, and to R0.57 with a low-E aluminium-framed panel (BRANZ Build 116, 2010). It is cheaper than double glazing and leaves the window untouched, but it pays back fastest in cold places like Dunedin and Christchurch.

What is secondary glazing?

A second pane fitted on the room side of an existing window, leaving a still layer of air between it and the original glass. The pane can be clear acrylic held on magnetic strips, or glass in its own slim aluminium frame, often as sliding sashes so the window behind can still be opened. Unlike retrofit double glazing, nothing about the original window changes: no glass comes out, no sash goes to a workshop.

EECA describes secondary glazing as a more cost-effective option than full double glazing that depends on your existing windows being in good condition. A rotten sill or a frame that leaks air is still rotten and leaky with a panel in front of it.

How well does secondary glazing insulate?

The best NZ evidence is a Victoria University of Wellington study, published in BRANZ's Build magazine. It measured a typical single-glazed aluminium window with a timber reveal in the BRANZ Guarded Hot Box, then fitted four common secondary glazing systems to the same window and measured them again.

Whole-window R-value (m²K/W) of a single-glazed aluminium window with each secondary glazing system, BRANZ Guarded Hot Box (BRANZ Build 116, Feb/Mar 2010)
SystemR-valueImprovement
Single glazing only (base window)0.15—
Heat-shrink plastic film, taped to the frame0.35140%
Magnetically attached acrylic sheet0.36150%
Aluminium-framed sliding secondary glazing, clear0.34130%
Aluminium-framed sliding secondary glazing, low-E0.57290%

Two things stand out. The cheap systems (shrink film and magnetic acrylic) performed as well as the clear framed glass, so you don't need a glazier to get most of the gain. And low-E glass is what makes the big jump: the low-E framed panel insulated about 60% better than any of the clear options.

For context only, because the methods differ: the H1/AS1 5th edition table BRANZ reproduces rates a plain aluminium window with basic double glazing at R0.26 (uPVC and frame R-values). A secondary panel over an aluminium window traps a wider air gap and keeps the cold frame on the outside of it, which is why it compares well against double glazing in an aluminium frame.

Is secondary glazing worth it where you live?

The same study modelled ten ordinary pre-1978 uninsulated houses in four cities, heated mornings and evenings to 18°C with electric heaters, and worked out how long each system took to pay for itself in heating savings.

Modelled payback of secondary glazing by city, at 2010 electricity prices (BRANZ Build 116)
SystemAucklandWellingtonChristchurchDunedin
Magnetic acrylic39.9 years21.0 years18.4 years15.4 years
Aluminium-framed, clear42.5 years22.3 years19.6 years16.4 years
Aluminium-framed, low-E37.6 years19.6 years17.2 years14.4 years
Shrink film (yearly saving after kit cost)−$79$71$123$187

The study's conclusion: not financially viable in a warm climate like Auckland, but a cost-effective, practical alternative to replacing single glazing in Christchurch and Dunedin. Each city's figures, next to what retrofit double glazing costs there, are on the Auckland, Wellington, Christchurch and Dunedin pages. Power costs more now than it did in 2010, which shortens every payback in the table, but the order between cities holds. Money isn't the only return, either: a warmer window surface means a warmer room and less condensation, which is why most people fit it.

How much does secondary glazing cost in NZ?

For DIY magnetic panels you buy two things: the magnetic and steel strip, and acrylic sheet cut to each window. Award Plastics sells a 30m MagnetGlaze DIY roll (steel strip for the frame, magnetic strip for the panel) at $322 incl GST, $280 + GST (checked 27 October 2026), and cuts acrylic to size, including notches around window latches.

Framed secondary glazing with glass is made and fitted by a glazier and is quoted per window. We haven't found an independent published NZ price for it, so we won't invent one. Compare it with what retrofit double glazing costs for the same openings: $450–800 per m² of glass (CheckMyBuilder), or see your own windows in the calculator.

How do you fit magnetic secondary glazing?

  1. Measure each window to the inside face of the frame or reveal where the panel will sit, and allow for the strip width on every side.
  2. Clean the frame and let it dry, so the adhesive holds through winter.
  3. Stick the thin steel strip around the frame.
  4. Stick the magnetic strip around the edge of the acrylic panel, on the side that faces the window.
  5. Offer the panel up: the magnets pull it onto the steel and seal the air gap. Lift it off to clean, or for summer.

Secondary glazing or double glazing?

  • Choose secondary glazing for heritage or character joinery you don't want touched, in a rental, on aluminium frames where shrink film won't stick, or for a cold bedroom in Christchurch or further south on a small budget.
  • Choose retrofit double glazing for windows you open every day, when you'd rather not clean four surfaces, and when you plan to stay. It is one sealed unit in your existing frame.
  • Choose full replacement when the frames themselves have failed.
  • Either way, do the curtains and ventilation first. They are cheaper than any glass (the other alternatives).

Questions

Does secondary glazing work as well as double glazing?

It can come close. In BRANZ hot-box tests, magnetic acrylic lifted a single-glazed aluminium window from R0.15 to R0.36 and a low-E framed panel to R0.57. It relies on the existing frame being in good condition, and you have extra surfaces to clean.

How much does secondary glazing cost in NZ?

DIY magnetic kits are the cheapest: a 30m MagnetGlaze strip roll is $322 incl GST at Award Plastics (October 2026), plus acrylic cut to size. Framed glass secondary glazing is quoted per window by a glazier.

Is acrylic or glass better for secondary glazing?

In the BRANZ tests clear acrylic on magnets (R0.36) and clear glass in an aluminium frame (R0.34) performed about the same. Low-E glass did much better (R0.57). Acrylic is lighter and easy to lift off; glass scratches less.

Is secondary glazing worth it in Auckland?

On heating savings alone, rarely. The study behind the BRANZ figures modelled paybacks of about 40 years in Auckland against 15–17 in Dunedin. People in Auckland fit it for comfort and condensation more than for the power bill.

Does secondary glazing need building consent?

A removable panel fitted inside an existing window is not building work that usually needs consent. Replacing glazing has its own exemption: see does double glazing need building consent.

Published 27 October 2026, last updated 27 October 2026 by the NZ Double Glazing team.

Price my windows