Updated 2 November 2026 · 6 min read

Triple glazing in New Zealand: is it worth it?

Triple glazing rates R0.73 in uPVC against R0.69 for the best low-E double unit (H1/AS1 table, BRANZ): about 5% less heat loss. When the extra cost and weight pay off in NZ, and when they don't.

By the NZ Double Glazing team

Key takeaways

  • Triple glazing adds a third pane and a second sealed cavity. In the H1/AS1 5th edition table BRANZ reproduces, a triple unit rates R0.73 in uPVC and R0.81 in timber, against R0.69 and R0.77 for the best low-E double unit.
  • Worked out per square metre, that is about 5% less heat through the window than the best double glazing, but about 45% less than basic clear double glazing in uPVC (R0.40).
  • The same table gives no figure for triple glazing in a plain aluminium frame. It is a new-window or replacement product, not something you add to existing frames.
  • No independent NZ price is published. One NZ importer says locally made triple-glazed windows can cost 50% more than double, and its own imported range about 5% more. Treat both as a seller's figures.
  • The Window and Glass Association (WGANZ) says triple glazing may suit extreme climates or high-noise zones. For most NZ homes, good low-E double glazing in a good frame gets nearly all of the gain.

For most New Zealand homes, no: good low-E double glazing gets you nearly all of the benefit. In the H1/AS1 table BRANZ reproduces, triple glazing in uPVC rates R0.73 against R0.69 for the best double unit, about 5% less heat loss. It earns its cost in the coldest inland areas, on noisy roads and in very high-performance new builds.

What is triple glazing?

A triple-glazed unit has three panes of glass and two sealed cavities, usually filled with argon, instead of the two panes and one cavity of double glazing. One or more of the panes carries a low-E coating. The extra pane makes the unit thicker and heavier, so the sash and frame have to be designed for it. That is why triple glazing comes as complete new windows, mostly in uPVC, timber or thermally broken aluminium, rather than as a retrofit into the frames you already have.

Is triple glazing worth it in NZ?

Usually not, compared with good double glazing. The step from the best low-E double unit to triple is small: R0.69 to R0.73 in uPVC and R0.77 to R0.81 in timber (H1/AS1 table, BRANZ Bulletin 670). The step from basic clear double glazing to either of them is large. Spend first on low-E, argon and a better frame.

The Window and Glass Association, the NZ industry body, says triple glazing "may be suitable in extreme climates, or in high-noise zones", and notes that the H1 clause of the Building Code calls for double glazing in new builds, not triple. Most New Zealanders live in climate zones where winters are mild by European standards, which is where triple glazing became normal. The strongest cases here are the central North Island plateau, inland Canterbury and Otago, and homes built to Passive House or similar standards, where every part of the envelope is pushed hard.

Triple vs double glazing: the R-values side by side

Whole-window R-values (m²K/W), H1/AS1 5th edition Table E.1.1.1 as reproduced in BRANZ Bulletin 670 (Oct 2022). Higher is better.
Glazing unitAluminiumThermally broken aluminiumuPVCTimber (56mm)
Double: clear / air / aluminium spacer0.260.320.400.44
Double: low-E¹ / argon / aluminium spacer0.300.390.500.56
Double: low-E² / argon / improved spacer0.330.420.560.63
Double: low-E⁴ / argon / improved spacer0.370.500.690.77
Triple: low-E³ / clear / clear / argonNot available0.520.730.81

Two things stand out. Read down any column and the jump from clear double glazing to good low-E double glazing is far bigger than the jump from there to triple. Read across the rows and the frame matters as much as the glass: triple glazing in thermally broken aluminium (R0.52) trails low-E double glazing in uPVC (R0.56 and up).

How much less heat does triple glazing lose? A worked example

Heat loss through a window is proportional to 1 divided by its R-value (the U-value). Using the uPVC column of the table above:

Heat through one square metre of window per degree of temperature difference (W/m²K = 1 ÷ R). Calculated from the H1/AS1 R-values above.
Window (uPVC frame)R-valueHeat loss (1 ÷ R)Compared with triple
Double, clear glass, air fill0.402.50Triple loses about 45% less
Double, low-E¹, argon0.502.00Triple loses about 32% less
Double, best low-E⁴, argon, improved spacer0.691.45Triple loses about 5% less
Triple, low-E³, argon0.731.37—

So the honest comparison depends on what the quote puts triple glazing up against. Against the basic double glazing that many quotes still default to, triple is a big step. Against the best double unit in the same frame, it is a small one. Ask for both prices on the same frame and compare those, not triple against clear double.

How much does triple glazing cost in NZ?

There is no independent NZ price for triple glazing. Koffman, an NZ supplier of imported windows, says locally supplied triple-glazed windows "can be 50% more expensive" than double glazing and its own about 5% more. Treat both as one seller's figures. Replacement double-glazed aluminium windows run from about $1,500 to $2,500+ each (Wellington Glass, Feb 2026).

Worked example only: the premium range one NZ supplier quotes (5–50%) applied to a published replacement-window price. Not a quote. Base price: Wellington Glass, Feb 2026, double-glazed aluminium replacement windows.
JobDouble-glazed replacementIf triple adds 5%If triple adds 50%
One window$1,500–2,500+$1,575–2,625+$2,250–3,750+
12 windows (example house)$18,000–30,000+$18,900–31,500+$27,000–45,000+

The base price is for aluminium, and the H1/AS1 table gives no triple rating in plain aluminium, so a real triple quote will be for uPVC, timber or thermally broken aluminium, priced on its own terms. The worked example shows the scale of the decision rather than a price. For what double glazing costs in each form, see double glazing cost NZ or size your own job in the calculator.

What are the disadvantages of triple glazing?

  • Weight. A third pane adds around 50% to the weight of the window, according to an EBOSS article by an NZ window maker, which means heavier sashes, stronger hinges and frames made for the load. WGANZ notes simply that "triple glazing adds weight".
  • It is a replacement, not a retrofit. Most NZ retrofit systems, which put a new sealed unit into existing timber or aluminium frames, are built around a double unit. Going triple usually means new windows, consent where the work needs it, and the price of full replacement. See retrofit vs replacement.
  • Less free winter sun. Each extra pane and coating lets a little less solar heat through. On a north-facing window that warms the room in winter, that can cancel some of the gain. Ask for the solar heat gain figure as well as the R-value.
  • A small gain on the best double glazing. About 5% less heat loss in uPVC, from the table above. The money may do more as ceiling or underfloor insulation, which EECA's Warmer Kiwi Homes programme co-funds and glazing is not on.

When is triple glazing worth paying for?

  • A new build or full window replacement in a cold climate zone, where the frames are new anyway and the extra cost is a share of a job you are already paying for.
  • A house aiming well above the code minimum, such as a Passive House design, where windows are often the weakest part of an otherwise well-insulated envelope.
  • A bedroom on a busy road or under a flight path. WGANZ names high-noise zones as a case for triple glazing, though it notes the result depends on the noise and on how airtight the building is. Laminated glass in a double unit is the usual alternative; ask for both.
  • When the quote premium is small. If a supplier really can do triple for about 5% more on the same frame, the case is easier. Get it in writing against a like-for-like low-E double unit.

What to ask for on a triple glazing quote

  1. A price for the same windows with a low-E, argon-filled double unit, so you are comparing like with like.
  2. The whole-window R-value for both, and how it was worked out (not the centre-of-glass figure).
  3. The frame material, and whether the hinges and stays are rated for the extra weight.
  4. The solar heat gain coefficient for north-facing windows.
  5. Who handles building consent if the work needs it, and the warranty on the sealed unit separately from the frame.

Questions

Is triple glazing worth it in NZ?

For most homes, no. In the H1/AS1 table BRANZ reproduces, triple glazing in uPVC rates R0.73 against R0.69 for the best low-E double unit, about 5% less heat loss. It makes more sense in cold inland areas, noisy locations and very high-performance new builds.

How much more does triple glazing cost than double glazing in NZ?

No independent NZ figure is published. One NZ supplier says locally made triple-glazed windows can cost 50% more than double glazing and its imported range about 5% more. Ask for both on the same frame and glass spec.

Can you retrofit triple glazing into existing windows?

Rarely. Triple units are thicker and heavier, and most NZ retrofit systems are designed around a double unit. Triple glazing is usually bought as complete new windows in uPVC, timber or thermally broken aluminium.

Does the building code require triple glazing in NZ?

No. WGANZ notes that the H1 clause calls for double glazing in new builds, not triple. Under the H1/AS1 5th edition Schedule Method, new windows needed R0.46 (zones 1–4) or R0.50 (zones 5–6), which good low-E double glazing in uPVC or timber meets. See H1 and your windows.

Is triple glazing better for noise?

It can be, but it is not automatic. WGANZ names high-noise zones as a case for triple glazing and says the result depends on the noise and on how airtight the building is. A double unit with laminated glass is the usual alternative, so ask for both.

What are the disadvantages of triple glazing?

Weight (heavier sashes and frames), cost, the need for new windows rather than a retrofit, slightly less free winter sun through north-facing glass, and a small gain over the best double glazing (about 5% in uPVC).

Published 2 November 2026, last updated 2 November 2026 by the NZ Double Glazing team.

Price my windows