Updated 1 November 2026 · 6 min read

Low-E glass in New Zealand: is it worth it?

Low-E glass adds about 5–10% to a double glazing job (Wellington Glass) and lifts a window from R0.26 to R0.30–0.37 in aluminium, R0.40 to R0.50–0.69 in uPVC (H1/AS1 table, BRANZ). When it pays.

By the NZ Double Glazing team

Key takeaways

  • Low-E (low-emissivity) glass has a microscopically thin metal-oxide coating that reflects heat back into the room instead of letting it radiate out through the glass.
  • EECA says low-E glass can improve a window's performance by up to 30%, and argon gas in the cavity by a further 5–20%.
  • It costs little extra: Wellington Glass says high-performance glass typically adds 5–10% to the overall cost. On a typical $16,000 job (CheckMyBuilder) that is roughly $800–1,600.
  • In the H1/AS1 5th edition table BRANZ reproduces, low-E and argon lift basic double glazing from R0.26 to R0.30–0.37 in plain aluminium, and from R0.40 to R0.50–0.69 in uPVC.
  • The frame limits it: low-E in plain aluminium (R0.30–0.37) still trails clear glass in uPVC (R0.40). In a retrofit it is usually worth the 5–10%.

For most New Zealand homes, yes. Low-E glass costs about 5–10% more than clear double glazing (Wellington Glass), and EECA says it can improve a window's performance by up to 30%. In the H1/AS1 table BRANZ reproduces, it lifts a double-glazed uPVC window from R0.40 to R0.50–0.69. The gain is smaller in a plain aluminium frame, because the frame loses heat whatever glass is in it.

What is low-E glass?

Low-E stands for low emissivity. Ordinary glass absorbs heat from a warm room and radiates it outside. Low-E glass carries a coating of metal oxides, far too thin to see, that reflects long-wave heat back into the room instead. In a double-glazed unit the coating sits on one of the inner faces of the glass, inside the sealed cavity, where it is protected from cleaning and weather. To the eye it looks like clear glass; some coatings give a faint tint in certain light.

There are two broad kinds. Hard-coat (pyrolytic) low-E is baked onto the glass as it is made and is tougher. Soft-coat (sputtered) low-E is applied afterwards in a vacuum chamber, performs better, and has to be sealed inside a unit. Glaziers sell them under their own product names, so ask which kind a quote includes rather than going by the brand.

Is low-E glass worth it in NZ?

Usually, yes, because the extra cost is small and the gain is large. Wellington Glass puts high-performance glass at 5–10% on top of the overall price, and EECA says low-E can improve a window's performance by up to 30%. The case is strongest in colder places such as Dunedin, Christchurch and the central North Island, and in timber or uPVC frames.

The clearest independent test we know of is BRANZ's Guarded Hot Box work on secondary glazing. On a single-glazed aluminium window (R0.15), adding a clear aluminium-framed panel reached R0.34; the same panel with low-E glass reached R0.57 (BRANZ Build 116, 2010). Same frame, same gap: the coating alone made the difference between a modest gain and a large one. The full results are in our secondary glazing guide.

What R-value does low-E glass give?

Whole-window R-values (m²K/W), H1/AS1 5th edition Table E.1.1.1 as reproduced in BRANZ Bulletin 670 (Oct 2022). Higher is better.
Glazing unitAluminiumThermally broken aluminiumuPVCTimber (56mm)
Double: clear / air / aluminium spacer0.260.320.400.44
Double: low-E¹ / argon / aluminium spacer0.300.390.500.56
Double: low-E² / argon / improved spacer0.330.420.560.63
Double: low-E⁴ / argon / improved spacer0.370.500.690.77
Triple: low-E³ / clear / clear / argonNot available0.520.730.81

The superscript numbers are the table's low-E performance grades, from 1 (basic) to 4 (best). Read across a row and the frame matters as much as the glass; read down a column and low-E plus argon adds about R0.04–0.11 in plain aluminium, R0.07–0.18 in thermally broken aluminium, R0.10–0.29 in uPVC and R0.12–0.33 in timber. Under the 5th edition's Schedule Method, new windows needed R0.46 in climate zones 1–4 and R0.50 in zones 5–6 (BRANZ). Only the low-E rows in uPVC or timber, and the best grade in thermally broken aluminium, clear those. The 6th edition removed the Schedule Method; the 5th can be used until 26 November 2026 (H1 and your windows).

How much does low-E glass cost in NZ?

Wellington Glass says high-performance or tinted glass typically adds 5–10% to the overall cost of a double glazing job. Per window, that is roughly $28–85 on an aluminium retrofit priced at $550–850, and $40–120 on a timber retrofit at $800–1,200. On a typical $16,000 whole-house job (CheckMyBuilder), 5–10% is about $800–1,600.

Worked example: what low-E adds, using published NZ prices (checked 1 November 2026). The low-E figure is the 5–10% uplift applied to each price.
JobClear double glazingLow-E adds (5–10%)Source of base price
One aluminium window, retrofit$550–850$28–85Wellington Glass, Feb 2026
One timber window, retrofit$800–1,200$40–120Wellington Glass, Feb 2026
One replacement aluminium window$1,500–2,500+$75–250+Wellington Glass, Feb 2026
Typical whole house$16,000$800–1,600CheckMyBuilder

Size the job yourself in our double glazing calculator, which has a low-E option built on the same 5–10%. For the full price picture, see double glazing cost NZ.

Low-E or argon: do you need both?

They do different jobs. Low-E cuts radiant heat loss through the glass; argon, a heavier-than-air gas, slows heat moving across the cavity. EECA credits low-E with up to 30% better performance and argon with 5–20%, and recommends a cavity of 12–16mm. Every low-E row in the BRANZ table assumes argon, so the R-values above are for the two together. If the budget only stretches to one, low-E is the bigger gain.

When is low-E not worth it?

  • When the frame is the weak point. In plain aluminium, the best low-E unit in the table (R0.37) still trails clear glass in uPVC (R0.40). If the frames are failing anyway, spend on the frame first: uPVC windows or thermally broken aluminium.
  • On a north-facing window you rely on for winter sun, ask about a coating that lets more solar heat through. Some low-E products are tuned to block summer heat, which also blocks free winter warmth.
  • On a single failed unit, match what is next to it if you can see a difference in tint; otherwise upgrading as you go is a good habit. See replacing a failed unit.

What to ask for on a quote

  1. Is the glass low-E, and which grade or product? Hard-coat or soft-coat?
  2. Is the cavity argon-filled, and how wide is it? EECA recommends 12–16mm.
  3. What spacer is used: aluminium, or a warm-edge (improved) spacer?
  4. What whole-window R-value does the quote give, and how was it worked out?
  5. What warranty covers the sealed unit, separately from the frame?

Questions

Is low-E glass worth it in NZ?

Usually. It adds about 5–10% to the cost (Wellington Glass) and EECA says it can improve a window's performance by up to 30%. In the H1/AS1 table BRANZ reproduces, it lifts double-glazed uPVC from R0.40 to R0.50–0.69. The gain is smallest in plain aluminium frames.

How much does low-E glass cost?

Wellington Glass says high-performance glass typically adds 5–10% to the overall cost. That is about $28–85 on a $550–850 aluminium retrofit window and roughly $800–1,600 on a typical $16,000 whole-house job (CheckMyBuilder).

Can you see low-E coating on glass?

Not easily. The coating is a microscopically thin metal-oxide layer inside the sealed unit. It looks like clear glass, though some coatings show a faint tint at an angle or in certain light.

Does low-E glass stop condensation?

It helps, because the room-side pane stays warmer, so it is less often below the dew point. It doesn't remove moisture from the room; ventilation does that. See will double glazing fix condensation?

Is low-E glass required by the building code in NZ?

The code doesn't name low-E. Under H1/AS1 5th edition's Schedule Method, new windows needed R0.46 (zones 1–4) or R0.50 (zones 5–6), which in practice meant low-E in most frames. The 6th edition removed that method; the 5th can be used until 26 November 2026. Consent-exempt retrofits aren't held to an R-value.

Is triple glazing better than low-E double glazing?

Slightly, on paper. In the same H1/AS1 table, triple glazing rates R0.73 in uPVC against R0.69 for the best low-E double unit, and R0.81 against R0.77 in timber. Triple units are heavier and need frames made for them, so for most NZ homes a good low-E double unit is the better buy. Is triple glazing worth it?

Published 1 November 2026, last updated 1 November 2026 by the NZ Double Glazing team.

Price my windows