Thermally broken windows in New Zealand: are they worth it?
A thermally broken aluminium window loses 19–26% less heat than plain aluminium with the same glass (H1/AS1 table, via BRANZ) and adds 25–40% to the joinery cost. What they are, worked numbers, and when to choose them.
By the NZ Double Glazing team
Key takeaways
- A thermally broken window is an aluminium frame split into an inside half and an outside half, joined by a strip of low-conductivity material, so heat can't run straight through the metal.
- With the same double glazing, the H1/AS1 5th edition table gives R0.32 thermally broken against R0.26 plain aluminium, rising to R0.50 against R0.37 with the best low-E glass (BRANZ Bulletin 670).
- Worked through, that is 19–26% less heat lost through each window, for the same glass.
- Thermally broken joinery adds 25–40% to the joinery cost (Superior Renovations). It only comes with new windows: a retrofit keeps the frame you have.
- uPVC and timber still beat it in the same table, and BRANZ says a thermally broken frame only performs if it's installed so the inner half isn't exposed to outside air.
A thermally broken window is an aluminium window whose frame is split in two and joined by an insulating strip, so the cold outside metal doesn't touch the inside. With the same double glazing it rates R0.32 against R0.26 for plain aluminium (H1/AS1 table, via BRANZ), about 19% less heat lost, and up to 26% less with low-E glass. It adds 25–40% to the joinery cost (Superior Renovations).
What does it mean if a window is thermally broken?
Aluminium conducts heat very well, which is why BRANZ puts plain aluminium at the bottom of its list of frame materials for thermal performance. In a thermally broken frame the aluminium section is made in two parts, an outer and an inner, held together by a continuous strip of material that conducts far less, usually a reinforced plastic (polyamide) or a cast resin. Heat has to cross that strip to get out, so the inside of the frame stays closer to room temperature.
What is the difference between double glazing and thermally broken windows?
Double glazing is about the glass: two panes with a sealed gap between them. Thermal breaks are about the frame. They solve different heat paths, and most new aluminium windows sold for warm homes have both. You can have double glazing in a plain aluminium frame, which is what most retrofit double glazing into older aluminium joinery gives you, but you can't have a thermally broken frame without buying a new window.
Thermally broken vs plain aluminium: the R-values
| Glazing unit | Aluminium | Thermally broken aluminium | uPVC | Timber (56mm) |
|---|---|---|---|---|
| Double: clear / air / aluminium spacer | 0.26 | 0.32 | 0.40 | 0.44 |
| Double: low-E¹ / argon / aluminium spacer | 0.30 | 0.39 | 0.50 | 0.56 |
| Double: low-E² / argon / improved spacer | 0.33 | 0.42 | 0.56 | 0.63 |
| Double: low-E⁴ / argon / improved spacer | 0.37 | 0.50 | 0.69 | 0.77 |
| Triple: low-E³ / clear / clear / argon | Not available | 0.52 | 0.73 | 0.81 |
The thermal break is worth R0.06 with clear glass and R0.13 with the best low-E unit, and the gap widens as the glass improves. That's the frame becoming the weak point: once the glass is good, a plain aluminium frame holds the whole window back. It's also why the best low-E unit in plain aluminium (R0.37) still trails basic double glazing in uPVC (R0.40). The superscript numbers are the table's low-E grades, 1 (basic) to 4 (best); more on them in low-E glass.
How much less heat does a thermally broken window lose? A worked example
Heat loss through a window is proportional to 1 ÷ R, so the saving from a thermal break is 1 − (R plain ÷ R thermally broken). Using the table's own figures:
| Glazing unit | Plain aluminium R | Thermally broken R | Less heat lost |
|---|---|---|---|
| Clear double / air | 0.26 | 0.32 | 19% |
| Low-E¹ / argon | 0.30 | 0.39 | 23% |
| Low-E² / argon / improved spacer | 0.33 | 0.42 | 21% |
| Low-E⁴ / argon / improved spacer | 0.37 | 0.50 | 26% |
Read it this way: a house of new low-E aluminium windows loses about a fifth to a quarter less heat through those windows with thermally broken frames than with plain ones. That is through the windows only, not the whole house. Walls, ceiling, floor and draughts all carry heat too, so the change on a power bill will be smaller than the percentage.
Do thermally broken windows meet the H1 building code?
Under the 5th edition of H1/AS1, the Schedule Method minimum for new windows is R0.46 in climate zones 1–4 and R0.50 in zones 5–6 (BRANZ). No plain aluminium window in the table reaches R0.46. Thermally broken aluminium clears both only with the best low-E unit (low-E⁴, argon, improved spacer) at exactly R0.50, or with triple glazing at R0.52. The lower low-E grades (R0.39–0.42) fall short. The 6th edition, published 27 November 2025, removed the Schedule Method, and the 5th can be used until 26 November 2026. Details in H1 and your windows.
How much do thermally broken windows cost in NZ?
The one published NZ figure we have found is Superior Renovations': thermally broken aluminium adds 25–40% to the joinery cost. Replacement windows in general run $800–1,600 per m² (CheckMyBuilder) or $1,500–2,500+ per opening (Wellington Glass). Neither of those says which frame it assumes, so the example below shows the scale of the uplift, not a quote.
| Per opening | 8 windows | 12 windows | |
|---|---|---|---|
| Replacement, frame not specified (Wellington Glass) | $1,500–2,500 | $12,000–20,000 | $18,000–30,000 |
| Same + 25–40% for thermally broken joinery | $1,875–3,500 | $15,000–28,000 | $22,500–42,000 |
The uplift applies to the joinery, not to installation, removal and making good, so on a full job the real difference is likely to be smaller than the bottom row suggests. The window counts are examples. Ask for quotes in plain and thermally broken aluminium for the same openings and the same glass, and compare the R-value each quote states. To size a job in either form, try the calculator or see double glazing cost NZ.
Can you add a thermal break to existing aluminium windows?
No. The break is built into the frame section when it's made, so getting one means new joinery. If your aluminium frames are sound, retrofit double glazing for aluminium windows puts a sealed unit into them for $550–850 a window (Wellington Glass) and leaves the frame as it is. If the frames are failing, or the cold frame itself is what bothers you, that's a full window replacement, and the thermally broken option is part of that decision.
Are thermally broken windows worth it?
- Worth it if you're replacing aluminium windows anyway. The extra is on the joinery only, and for a window that will be there for decades a fifth to a quarter less heat loss is a lot to give up.
- Worth it with good glass. The break does most for low-E units, where it takes the window from R0.37 to R0.50. Pairing it with clear glass leaves performance on the table.
- Worth it in colder climate zones. For zones 5–6 under the 5th edition's Schedule Method, thermally broken frames with the best low-E glass are the only aluminium option in the table that reaches R0.50.
- Compare it with uPVC and timber first. In the same table uPVC beats thermally broken aluminium by R0.08–0.19 across the double-glazing rows. Aluminium wins on slim frames and big sliders. uPVC windows compared.
- Not the answer for sound frames on a budget. If the joinery works, retrofit into it costs about half what replacement does, and secondary glazing costs less again.
Does installation matter?
Yes, more than for other frames. BRANZ notes that a thermally broken aluminium frame only performs if it's installed so the inner half of the frame isn't exposed to outside air, and that setting any thermally efficient window in line with the wall insulation gets more out of it. uPVC and timber depend on this less. Ask the installer where the frame will sit in the wall.
What to ask for on a thermally broken window quote
- The whole-window R-value for each window, and how it was worked out (WEERS or the H1/AS1 method).
- The thermal break: what it's made of and how wide it is.
- The glazing unit: low-E grade, gas fill, cavity width, and spacer type.
- A plain aluminium price for the same windows, so you can see the uplift for yourself.
- Where the frame sits relative to the wall insulation.
- Whether the job needs consent. Like-for-like replacement in an existing house of up to two storeys is usually exempt; the conditions.
Questions
What does thermally broken mean on a window?
The aluminium frame is made in two halves, inside and outside, joined by a strip of material that conducts heat far less than metal. Heat can't run straight through the aluminium, so the inside of the frame stays warmer and the window loses less heat.
Are thermally broken windows worth the extra cost?
If you're buying new aluminium windows, usually yes. With the same glass they lose 19–26% less heat than plain aluminium (worked from the H1/AS1 table, via BRANZ), for 25–40% more on the joinery (Superior Renovations). If your frames are sound, retrofitting double glazing into them costs much less.
What is the difference between double glazing and thermally broken windows?
Double glazing is the glass: two panes and a sealed gap. A thermal break is in the frame. They fix different heat paths, and good new aluminium windows have both. You can retrofit double glazing into old frames, but a thermal break only comes with new joinery.
Can you retrofit a thermal break?
No. The break is part of the frame section, so it needs new windows. Retrofit double glazing keeps your existing aluminium frame, cold frame and all.
Is thermally broken aluminium as good as uPVC?
Not in the H1/AS1 table. With the same basic double glazing it rates R0.32 against R0.40 for uPVC and R0.44 for timber (BRANZ Bulletin 670). Aluminium's strengths are slim frames, large sliders and a wide colour range.
Do thermally broken windows stop condensation?
They help on the frame, because the inside of the frame runs warmer. They don't remove moisture from the air, so a damp house will still get condensation somewhere. More in will double glazing fix condensation.
Sources
- BRANZ Bulletin 670: Specifying windows and doors under H1 (updated Oct 2022)
- BRANZ Build: A view on window frame selection
- MBIE: information on H1/AS1 sixth edition (published 27 November 2025)
- Superior Renovations: double glazing cost calculator NZ
- CheckMyBuilder: double glazing retrofit cost
- Wellington Glass: double glazing cost Wellington
Published 3 November 2026, last updated 3 November 2026 by the NZ Double Glazing team.